пКЛ+ &ААX░ПБu~ВПАВ -ЎуК>Н7 <АэА░АВВу ╡ГdЙААВАВ This function allows to split one (big) file into multiple smaller files (usually of the same size), e.g. for the transport over the Internet or with diskettes. The partial files can be written either directly on diskettes, or into a directory on the harddisk.On the destination computer, the files can be combined either with Total Commander (Command Combine files), or e.g. with the DOS command copy. The command line would be:copy /b part.001 + part.002 + part.003 + part.004 original.dat▓ВЛЁО0 .АА░АВААВАВ This combines parts 1 to 4 to the file original.dat.After splitting Total Commander creates a file with extension .crc. This file contains the name and size of the original file, as well as the CRC checksum. You don't need this CRC file to combine the files with a different program. However, Total Commander can test with this file if the original file was recreated correctly.иo>Нд┴9 @А▀АX░ПБu~ВПАБАВВААГВ Split the file 'xxx' to directoryHere you can enter the target path. The file names will be chosen by Total Commander like this: The name is kept, and the extension is changed to .001, .002 etc. This allows a maxЁОд┴tКimum of 999 parts. Leave the field empty to split to the current directory.Bytes per fileHere you can enter the desired file size in characters (bytes), or you can select one of the pre-defined sizes from the list. If you choose 'automatic', Total Commander will use the whole free space (on removable disks). When splitting to the hard disk, 'automatic' will use a size of 1.44 MB (3 1/2 " diskette).,їЁО╨┬7 <АыАX░ПБu~ВПАВААБАВ Delete files on target disk (removable disks only)If this option is checked, all files in the target directory and below will be deleted. Before deleting, Total Commander will show a list of files and ask for confirmation to delete them.,д┴№┬' А ААВАВ A╨┬=├1я Э =├ы╞Synchronize dirs:№┬w├& А(АААВ Synchronize dirsу=├Е┼+ $А╟А░АВАВВВ With this command, you can compare two directories with all subdirectories, and copy the newer files to the other directory (or any different directory). Furthermore, you can compare the contents of a directory with a ZIP archive, or with a directory on an FTP server. Currently no other packers than zip are supported.This function is also useful to compare a CD-R (created with a CD burning program) with the originals. To do this, you need to check the option "by content".@їw├┼╞K dАыА░АВААААу░Я┤tЙВВВу╒a$ФАЙАВАВ Important note: When uploading files to an ftp server using the synchronize function, the date/time of the local file will be modified! Please read Synchronize dirs and FTP servers.See also:- Dialog box Synchronize directories&Е┼ы╞# АААВ Q ┼╞<╟1ч Ю <╟▐Synchronize dirs and FTP serversL%ы╞И╟' АJААВАВ Synchronize dirs and FTP servers><╟╞╩= HАА░АВВАВВАВВААААВ 1. PurposeThis function can be used to keep an Internet Server like a personal homepage up to date. The pages are edited on the local machine, and only the modified pages are uploaded. You need to take special care to make this work correctly! Therefore please read the following very carefully:2. The problem with file date/times and FTPNormally when you copy a file from one local directory to another, it keeps its 'last modified' date and time. However, when you upload to an FTP server, there is no function available to tell the server what the date/time of the file is! Therefore, the file will always get the current local time on the FTP server! This is a problem, because even after the upload, the local and remote directory will be different!AуИ╟╬^ КА╟А░АВАВВААААААААА.АА АА.ААААВ 3. How this is solved in Total CommanderThe synchronize function sets the date/time stamp of the local file to the date/time of the remote file after it has successfully uploaded the file. Now the two files will look identical! However, this may cause other problems: You cannot synchronize this local directory with any other directory on the same machine, or with a second FTP site, because every time you upload a file, its date/time changes! Therefore it is important that if you use synchronize between a directory and FTP, you do not use synchronize with this directory to more than one location! New: Total Commander does NOT change the date/time of the local file(s) if the option "ignore dates" is checked.╫╞╩.D VАпА░АВАВВААА АВААААВ 4. Other problems and their solutionsProblem: The FTP server may be in a different time zone than your computer! For example, the server could be located in California, while you are in New York, or even in Europe!Solution: Before comparing, select the time zone difference in hours between your location and the server. If the server is to the west, the difference is positive. Example: From New York to California it's 3 ╬.ы╞hours, and from Germany 9 hours.╟╬2= HАПА░АВААА ВААААВВ Problem: Before you started to use Synchronize dirs, you uploaded the files using Total Commander directly, or some other tool. Now even identical files will look different!Solution: To avoid that you need to re-upload or download all files which are identical anyway, select all files from which you know that they are identical. Right click on them, then choose 'Set local file date to remote date'. This will make the files look identical.\!.О; DАCА░ААА АВААААВ Problem: Unix machines distinguish between upper- and lowercase file names. Windows machines, however, can only display mixed case names, but do not distinguish between files with different case.Solution: When Total Commander uploads a file to an FTP server, and a file with the same name but different case already exists on the server, the uploaded file will get the name of the already existing file. This avoids that two files with the same name will exist in the same directory. If you want to upload a different file name with the file, you will have to delete the target file first (select+right click menu->delete). For files which do not already exist on the server, you can choose whether the file should be uploaded without a name change, or with the name converted to lowercase.ЛI2B RАХА░АВААА АВААЖ"А В Problem: Unix machines store text files in a different way than DOS/Windows machines. Unix machines store the line end sign in a single character, while DOS/Windows uses two characters (carriage return / line feed). Therefore text files (including HTML) are smaller on Unix than on DOS machines!Solution: When Total Commander encounters two files with same time stamp, but different size, it counts the line ends of the local files, and calculates the size of the Unix-style text file from this. If the sizes match, the Synchronize function will show the following symbol: 'О@$ АА░АВ q@▒1 2АААX░оTВ.Ау╒a$ФЙАВ For more information, see the Synchronize dirs dialog box.-@▐( А А░АВАВ C▒! 1ъБ+Я ! щ System informationвo▐├ 3 6А▐А░АВВАуБк█тЙВАВ System informationOpens a Dialog box with a variety of system information on your hard- and software.&! щ # АААВ ?├ ( 1П а ( xTabstop header╩щ +9 @АХААВАВА ВАА уЧг─rЙВ Tabstop headerThe tabstop header allows sorting of the file list by name, extension, size, and date by clicking on the appropriate header. Clicking a second time on the same header reverses the order. A small arrow to the left of the header text shows the sort direction.The tabstop header also allows to move the tabstop positions of the file list. You must select Configuration - Save position to save the tabstop positions after changing them.&( Q# АААВ '+x$ АА░АВ AQ╣1╝ б ╣4Target directory{4x4G \АiА░АВВАААААААААВВАВ Target directoryThis is the directory to which files are copied/moved. The directory you specify must exist (You must create it before copying). .. or \ are also accepted as the target directory, and relate to the source directory. If no target is specified, the source directory is assumed.> ╣r1╗`Й( в r@Target=SourceW4╔< FА7А░АВВАВВААААВАВ Target=SourceChanges the target path to the current source path.With the shortcut CTRL+left/right arrow the directory or archive under the cursor can be opened in the other file window. If no directory/archive is under the cursor this shortcut works like Target=Source.&r@# АААВ ╔@4> ╔J@13Ж*VАг J@?BTest archives╟П@B8 >ААААВАВВВААВАВ Test archivesThis option will test all selected archives by unpacking them to memory and calculating the CRC checksum. Total Commander will show a message if the CRC doesn't agree with the checksum stored in the archive, or any other error occurs. Since TAR files aren't protected by a CRC checksum, they cannot be tested by this function.the shortcut for this function is ALT+SHIFT+F9..J@?B+ &ААX░ПБu~ВПАВ NBНB1 д НBHHThe internal file lister (F3)Q"?B▐B/ .АDАX░ПБu~ВПАВАВ The internal file lister (F3)ИНBfGu ╕А'А░АААААААВВуFcx&АЙАААААААААААААААААВ The integrated file lister allows to view files of almost any size (now up to 2^63 bytes) in text, unicode, html, binary or hex format, bitmap graphics, multimedia files, and now also RTF files. It keeps only a small part of the file in memory (except for bitmaps), the rest is automatically loaded when scrolling through the text.If you open the viewer with multiple files, (see Configuration - Edit / View), you can switch from one file to the next/previous using the keys n (next) and p (previous file). When you are viewing multimedia files or listening to sound, Lister will switch at the end of a file automatically to the next file (playlist function). With Ctrl+A you can select the whole text. You can use the cursor keys and Home, End, PgUp and PgDn or SPACE to scroll trough the text. Alternatively you can use your mouse. You can open as many file viewers as you want (and your memory can hold). All file viewers are closed when Total Commander terminates. Press F2 to refresh the content of a file.L#▐B▓G) "АFА░АВВАВ Description of lister's menu:p$fG"HL hАHА░Ий¤Qу▌╫СЕАЙГу╗|РЕЙГуЭЇ,╠ЙГуЁЖ"фЙАВВ FileEditOptionsxxx %&▓GHH# АААВ F"HОH1КйЗ%А*е ОH╥KUnpack specific filesI HH╫JJ bА А░АВВАААААААВВумОaйЙААВ Unpack specific filesAllows the unpacking of all or specific files from the archive under the cursor bar or from an open archive. Move the cursor bar to a valid archive and choose Unpack from the menu Files or press ALT+F9.This will open a Dialog box to choose a target directory. Afterwards you can enter wildcards (like *.doc *.txt) to specify which files to unpack. If you want to unpack a file containing spaces, you must put the file name in double quotes, e.g. "Letter to Mr. Smith.doc".√─ОH╥K7 <АЙА░АВААААВВАВ Hint: To unpack only a few files, simply double click on the archive. This opens the archive and shows its contents. You can then copy the files to the desired directory with F5 - copy.B╫JL1\1 (((ж L.NUnshare directoryзs╥K╗M4 6АчА░АВВАААВАВ Unshare directoryIf Windows for Workgroups or Windows NT is installed, this menu option allows to unshare the directory under the cursor, i.e. block external access to this directory. The function works the same as in Windows file manager. In Windows 95/98 you can find the Share/Unshare function in the "properties" dialog, which you get by pressing ALT+ENTER.LLN. ,А<А░ВуАуИ<ЙВВ See also Share directory'╗M.N$ АА░АВ @NnN1 з nNWМUpdates&Supportd<.N╥N( АxА░АВАВ Updates to Total Commander 6.0x from a previous versionX$nN6Б4 6АIАRААААААВ If you have Commander 3.0 or later, you can simply install the new version over your old registered version, and the registration will be preserved. If you have version 2.11 or older, your key is no longer valid. The old key wincmd.key had a size ╥N6Б.Nof 128 bytes, the new key 1024 bytes. If you are a registered user of Commander 2.11 or earlier, you can get a new key file for free by e-mailing your name, address and registration number (written on your distribution disk or on the licence) to the e-mail address found on the following page:P%╥NЖБ+ &АJАX░ЬfВААВ http://www.ghisler.com/update.htmh?6БюВ) ААRАВАВ You can find detailed update instructions on that page.If you don't have access to a modem, you can obtain the update by sending your name and address together with US$ 15.-/CHF 15.- cash, or Mastercard/VISA payment (NOT via Internet!) in the amount of CHF 15.- to the address below (please don't send any checks).g;ЖБUГ, (АvА░АВАВАВ Updates from Commander 3.x/4.x/5.x to later versionsЩgюВюД2 2А╧АRАААВААВ As soon as you are registered, (until further notice) all updates are free, provided that you get the latest version yourself, by downloading it. Just install the new (Shareware) version over the old one. The only important thing is to keep the file wincmd.key. You can find the latest Shareware version on our Internet homepage:http://www.ghisler.comтUГ¤Е- (А┼А░АВАВАВ If you don't have access to the Internet, you can get the program directly from us by sending US$ 15.-/CHF 15.- cash, or Mastercard/VISA payment (NOT by e-mail!) in the amount of CHF 15.- (please don't send any checks).╚ЫюД┼Ж- (А7АRАВВААВ Bug reportsIf you find a bug in Total Commander you can report it at one of the addresses mentioned below. Please provide the following information:)¤ЕюЖ& ААXRЬfАВ Цa┼ЖДИ5 8А├АXRоTВ.АГВГВГВГВГАВ -an exact description of the bug (how can it be reproduced?)-version number and release date of Total Commander (see Help-about Total Commander)-Windows version-The file wincmd.ini-For GPFs: The error address, and if possible a drwatson.log produced by drwatson.exe (Windows 3.1) or the contents of the error box displayed by Windows 95/98.'юЖлИ$ ААRАВ ГQДИ.Й2 4АвА░АВВАуЇ╔ЭЙАВ SupportPlease first read the FAQ and visit our WWW page on the Internet:AлИoЙ' А4АRААВ http://www.ghisler.comЛ_.Й·Й, (А╛А░АВАВАВ If you still have questions or bug reports, you can reach me at the following addresses:┼oЙМB RАЛАX░╕JВ8АГААААВГБББББВВГВГВ -If you're on the Internet, write to us by e-mail to the e-mail on http://www.ghisler.com/support.htm for technical questions, or the address on http://www.ghisler.com/sales.htm for questions on ordering and registration.-You can also write to my postal address:C. Ghisler & Co.P.O. BoxCH-3065 BolligenSwitzerland-Unfortunately we cannot offer any support for non-functioning parallel port connections.-Please do NOT call me at home!+·Й,М( ААX░╕JВ8АВ +МWМ( АА░ДSАВ ?,МЦМ1╤ и ЦМ4└User interfaceЪVWМ0НD XАоА░ДSА-ВАВВВт#╜─АЖ"АЙАВ User interfaceClick on the section on which you want to have information!9ЦМiП' В;АМ░Д8Sту*еLАЖ"АЙААВткI∙АЖ"АЙАВтBцEЎАЖ"АЙААВтi╢ЗпАЖ"АЙАВтf╦АЖ"АЙААВу░ВхА/Ж"АЙАВтekбUАЖ"АЙААВтЯэрЙАЖ"АЙАВтШ-╩╝АЖ"АЙАВтЖбzАЖ"АЙАВтєа└oАЖ"АЙААВ (Button bar) (Drive selection list) (free space on drive) (Change to root/parent directory) (Folder tabs) (Current directory) (Directory Hotlist and History) (Tabstop header) (Number of selected files)U0Н╛П> LА0АМ░Д8Sтr 3АЖ"АЙААВ (Command line)DiП└< HААМ░Д8╟тэЪ╨щАЖ"АЙАВВ ╛П└WМ&╛П4└# АААВ V%└К└1н╜К Е&й К└с┬Verify CRC checksums (from SFV files)R,4└▄└& АXАААВ Verify CRC checksums (from SFV files)....К└ ┴+ &ААX░ПБu~ВПАВ 6▄└@┬/ ,АА░АуэZ├░ЙВАВ With this function you can verify checksums stored in checksum files, to make sure that a file is intact, e.g. after copying it over a network or with a removable medium. You can create such SFV files with the function Create CRC checksums (SFV format)....{L ┴╗┬/ .АШАX░ПБu~ВПАВАВ Files with an incorrect checksum are selected in the current file list.&@┬с┬# АААВ C╗┬$├1°А(▄Б$к $├┘├Vertical alignment<с┬`├& А,АААВ Vertical alignmentyL$├┘├- *АША░АВАВВАВ Shows the two file windows above each other instead of side by side.=`├─1╫хЕz*л ─░┼Volume labelЪ`┘├░┼: BА┴А░АВВАААВВА0ВВАВ Volume label...Allows setting and changing the volume label of the drive shown in the source window. The actual volume label is shown to the right of the drive selection box. The volume label may contain up to 11 characters (NTFS: 32). The following characters are NOT allowed:? / | ж . , ; : + = < > [ ] ( ) & ^ * " \B─Є┼1∙ м Є┼й╠What is Info-ZIP?>░┼0╞( А,А░АВАВ What is Info-ZIP?ЦkЄ┼╞╟+ $А╫А░ВуААВ Info-ZIP is a group of C programmers, with the goal of offering a free ZIP packer and unpacker on as many platforms as possible. With their permission, we translated parts of their code to Turbo Pascal and integrated it into Total Commander. The condition was that we did not charge additional fees for their code and that the source code is free (see below).m?0╞3╩. *АА░АВВВВВВВВВВ The Chief contributor to the unzipping code was Mark Adler. Special thanks go to him for making it available for free!If you can access the Internet, you can get the original c code inftp://ftp.uu.net/pub/archiving/zip/... [MIRRORS THE INFO-ZIP HOME SITE]or on some simtel.net mirrors. Our code will be available in the future on some Internet hosts (look for info-unz.dll).The ZIP packer uses the ZLIB library by Jean-loup Gailly of info-zip. I didn't convert it to pascal, but put it in the DLL wcmzip16.dll. ZLIB is available at the same site on the Internet.I╞╟|╠C TА А░АВАВВАВВААВВВВВВВААВ Free unzip source code in Turbo PascalIf you are a Turbo Pascal programmer, you can get the source code to my unzipping unit free by proceeding as follows:Send a formatted 3 1/2 inch-Disk and postage (international reply coupon: Europe CHFа2.-, Rest of the world CHFа3.-) to the following address:C. Ghisler & Co.P.O. BoxCH-3065 BolligenSwitzerlandThis offer is completely independent of Total Commander. There is absolutely no obligation to buy! We can also e-mail you the source code for free.-3╩й╠( А А░АВАВ I|╠Є╠1a н Є╠еWhat is Total Commander?А8й╠r╬H ^АqА░АВВААААААВВА1А2А1ВАВ What is Total Commander?Total Commander (former Wincmd) is a file manager for Windows (TM) similar to the Windows Explorer. But Total Commander uses a different approach: it has two fixed windows side by side like a well-known file manager for DOS.Here are some key features of Total Commander:@╚Є╠╛x ╛АСАX╕╕FВ8АГуУRЙВГу`=BЙВГу┤─wЄЙуи▐n─ЙуF╘┐IЙВГу/рbСЙААААААААААААВ -Keyboard functions similar to the DOS original.-Supports Drag & Drop with the mouse, including to the print manager.-Extended copying, moving, renaming and deleting of entire trees (Enables deleting "full" directories).-Archives are handled like subdirectorr╬╛й╠ies. You can easily copy files to and from archives. The appropriate archiving program is automatically called. pkzip, arj, lha, rar, uc2 and ace are all supported.╒Нr╬УH ^ААX╕╕FВ8АГуЕ-u╩ЙВГуТЛ0∙ЙВГу& єХЙВГААВ -Start-menu (User-defined commands) to place your frequently used DOS or Windows programs into a drop-down menu. The actual directory and/or the file under the cursor can be delivered to the application.-Command line for the simple starting of programs with parameters, simply by typing the program name or by pressing CTRL+ENTER or CTRL+SHIFT+ENTER.-Enhanced search function with full text search in any files across multiple drives.-Built in file viewer (F3) to view files of ANY SIZE in hex, binary or text format, using either the ASCII- (DOS) or the ANSI- (Windows) character set. The line width and font size can now be changed.ьд╛H ^АIАX╕╕FВ8АГує8░lЙує8░lЙААВГВГВГВГВАВ -Internal Unzip by Info-Zip, which allows unzipping without calling an external program! The source code in Turbo-Pascal is free and can be obtained directly from the author.-Configurable button bar to start external programs or internal menu commands.-Configurable main menu.-Internal unpackers for ZIP, ARJ, LZH, GZ, TAR, RAR and ACE formats.-Internal ZIP packer, based on ZLib by Jean-loup Gailly.&Уе# АААВ KЁ1чD о ЁєWhat's new in version 4.x?+цеE XА═АААВВАВВАВВАВВАВВАВВАВ What's new in this version?New functions and fixes in Total Commander 6.03:- Version 6.03 doesn't contain any important new features. See history.txt for a list of corrections.New functions and fixes in Total Commander 6.02:- Version 6.02 doesn't contain any important new features. See history.txt for a list of corrections.New functions and fixes in Total Commander 6.01:- Version 6.01 doesn't contain any new features. See history.txt for a list of corrections. ╚Ё( E XАСААВАВВАВАВА АВААВА ВВВ New functions and fixes in Total Commander 6.0:- Supports Unicode file names when Copying/Moving/Renaming files- Comparison of Unicode-Text files in "Compare by Content"- Folder Tabs for quickly switching between folders- Ctrl+T now used for the new Tabs, Ctrl+M for the Multi-Rename Tool- Regular Expressions for Searching, Multi-Rename Tool, Copying etc.- Separate buttons for Directory Hotlist and History- Speed display when copyingт9/ ,А┼АА ВВВАВАВВ - Copy function configurable via Settings dialog.- F2 in the copy dialog adds the files to the background transfer manager- Options button in the copy dialog allows to rename copied or target files automatically on identical name- Speed limit in the background transfer manager now also works when copying- Synchronize dirs now tries to set the date/time of FTP files via MDTM command (not working with all servers)- Synchronize dirs: Now also with archives other than ZIP#°( \+ $АёААВВВВВВВВ - Support for accents in domains for FTP and HTTP- Multiple new internal commands, like cm_copySamepanel, cm_copyOtherpanel, cm_createShortcuts, cm_SaveSelection, cm_ShowHint- Show sequence number in the program title if multiple Total Commander open- Drive button icons can be replaced via external DLL- Configuration dialog uses a list instead of tab headers- FTP: Resume all- Wait in the background for external packers- Double click on [..] in the root leads to "My Computer" (configurable)5ъ9Э@K dА╒АААВВАВВАВу& єХЙВВу7╦Ш[ЙВАВААВ - Environment variable COMMANDER_PATH now points to the Total Commander directoryNew functions and fixes in Total Commander 5.51:- A click on the currently active path allows to edit or copy/paste it- Include/exclude certain directories in search function- Search and synchronize dirs now also work with file system plugins- Support\Э@е for Lister plugins- Support for custom icons in file system plugins- Deleting of non-empty directories on SAMBA drives sometimes failed╞\еBB RАНАА ВВуBя╥(ЙАВАВААВВААВ - Moved OLE comment retrieval to a separate thread (background), because it can be slow for some file types- Couldn't view RTF file currently open in Word (sharing problem)- Support for internal commands in Ctrl+D menu (directory hotlist), e.g. cm_OpenDesktop- Limited Unicode support in file names: Delete, Rename, View, Edit and Show properties- See history.txt for a complete list of corrections.New functions in Total Commander 5.50:'·Э@╠D- (АїААВА ВВВВВВ - Name changed to "Total Commander" - see our homepage for the reasons- Change size display of total/marked files in footer below file lists (bytes, k or dynamic)- Copy additional NTFS streams when copying files.- Copy file comments with the files with F5 (optional, needs to be enabled first)- Create CRC checksums: Function can now also create and check MD5 checksums- Drag a link from Internet Explorer to Total Commander (holding down Shift) to open the URL dialog to download the linked fileёеBчF* "АуАА ВВВВВВВ - File system plugin interface to access external devices or other partitions- In Copy dialog, "Options" button which allows to set "Overwrite all", "Skip all" etc. before copying- Lister: In 'Fit to window' mode, resize the video window to the lister window- Lister: RTF-Viewer (can be disabled)- Multi-rename tool: Load/Save settings, for often used changes- Multi-rename tool, search+replace: Support for wildcards * and ?- Open partially downloaded ZIP files, even during the downloadт╠DїH, &А┼АА ВВВВВАВ - Option: Always open new FTP connections in the left or right file panel instead of the active file panel- Show file comments in file lists and as tooltips- Show name of logged-on user in the title bar if the program was started with RunAs- Synchronize dirs, asymmetric mode: Option to delete all empty dirs in right window (not available in zip or ftp)- The HTML viewer in Lister supports some more tags- Many small corrections and additions, see history.txt for details.b чFWJB RАAААВААВАВА ВВВВАВАВАВ New functions in Commander 5.10:- Unpack RAR 3 archives- Support for OTP-MD4 -MD5 and -SHA1-authentication for FTP- Decoder for Yenc-encoded files (Files - decode files)- Many small corrections and additions, see history.txt for details.New functions in Commander 5.01:ё║їHHK7 <АuАX░ШjВпААВВВВААВ - Unpack RAR 3 archives- Support for OTP-MD4 and -MD5-authentication for FTP- Many small corrections and additions, see history.txt for details.New functions in Commander 5.00:&WJnK# АААВ d HK╥MW |ААX░ШjВпААВААВААуТHЕЙВужР▓kЙВу╞&_дЙВу╠ovКЙВВ - Support for Windows XP themes on XP- "Commands" menu split into "Commands" and "Net"- FTP: support for more than 2 definition strings when defining a new server type- FTP+HTTP: Auto-Resume download if download-connection lost- FTP: SOCKS4+SOCKS5 Proxy support (active+passive mode!), SOCKS5 without encryption- Multi-Re